Hi
My Dell Studio 1450 power button is broken. I got a new panel but still there is a problem with the power button.
Check the image. The Yellow stuff is missing. Can I purchase the board somewhere ? Is there any way to clear the issue ?
Dell Studio 1450 Power button is broken
↧
↧
Dell M3800 Precision Webcam Not working As It Used To
My laptop's webcam suddenly stopped working as it used to. My laptop is a Dell M3800 Precison. It used to be great.. very fast and very clear even at very low lighting conditions. Now the fps have gone down drastically. Its very slaggish and it has stopped adapting to different lighting conditions. Outdoors its too bright and indoors too dark. I don't know if it has anything to do with this game I installed that I played using my webcam. Please help anyone.
↧
Laptop's starting issue
Hi,
I'm using Vostro3550 laptop. Since a week, the laptop is not getting switched on.
As soon as I have pressed the power button, the black screen will come and again it will try to start and again the same like a loop.
It would be very helpful if any one gives the solution for this..
↧
Windows 10/apps and software not connecting to internet
Hello, I just upgraded to windows 10 and cant apps and other software to talk or connect to internet. Like Store, Cortana and other apps as well, can anyone jelp me out? I have tried suggestions from posting problems on internet but no no avail nothing has worked, sure would like to get Cortana going.
Thanks, Greg
↧
Windows 10 update problem(inspiron 5547)
When i upgraded to windows 10 i performed system update and got dell touchpad driver error. Now that dell has updated its touchpad driver for windows 10, i installed through dell website and its working now. But i am still getting this error in windows update section. How to cancel or remove this annoying error?
↧
↧
SM Buss Controller Missing (Inspiron 5547)
I checked Dell's website today and downloaded all drivers for my laptop (Dell inspiron 5547). But i am still getting this error in device manager. How to install SM Buss controller in windows 10?
↧
Synaptics driver can not update
I have tried to update it but not be
↧
Windows 10 two finger tap with dell touchpad
Is there a way to enable two finger tap = right click on windows 10? It was enabled by default on windows 8.1 driver and there's no settings to be found about it on win10's drivers
↧
Dell n5040 win 10 graphic driver problem
Hello,i have a little problem with my driver of graphic card.I have dell n5040.On my new system windows 10 prod x64 when i close it,and after that open my laptop there is this message http://prntscr.com/80bksf
I am afraid,that this driver isn't compatable with win 10.Is there gonna be a problem in future,of my hardwer parts beacuse of driver,or should i return to win 7?
↧
↧
Windows 10 and XPS 15Z lap top
I have a 64 bit XPS 15Z laptop that I bought about 3 years ago. Dell says that it has not been tested for upgrade to Windows 10.
Has anyone tried to upgrade this machine to a Windows 10? How did it go?
Thanks;
↧
After I installed Windows 10, I can't disable the touchpad on my Inspiron N5030 laptop. Please help!!
This past weekend I did a full clean Windows 10 install on my Inspiron laptop. However after the install, I went to Dell Support website to download the Touchpad Driver for my N5030, but Windows 10 told me this driver software is not supported by the OS.
I also tried going to "Mouse & Touchpad Setting" and clicked on "Additional mouse options". However, in the "Mouse Properties" box, I can't find "Touchpad" or "Clickpad" tab, so there's no way for me to turn on/off my touchpad.
I know my laptop is a bit too old for Windows 10, but I still have a gut feeling that this touchpad should be able to be set somewhere!
Thank you very much in advance for you help!!!
↧
Windows Product key in BIOS
I purchased my Dell 5537 in Dec 2013 with Windows 8.1 Standard. Is the Windows product key in Bios. If so would it still be in bios if Windows Pro has been installed. Can I download Installation Media that is available at Microsoft and reinstall the Windows I started with, automatically getting the key from bios or will I need to purchase a new license?
↧
SD memory card/ Slot not working in Windows 10
I have installed the new windows 10 in my PC, before this i had windows 7 home premium. i have a memory card adapter in which i used to slid my micro SD card and was able to access it when i had windows 7, but when i upgraded to windows 10 and inserted the memory card reader in the slot it stopped detecting, their is no action and i am not able to access it.
Please help
System: Dell Studio 1558 2010-11 Model.
↧
↧
battery problem
sir mera laptop ko problem ye hai kay jb bhi hum isy hilaty hai ya uthaty hai to ye bnd ho jata h...mai ny 2, 3 bar battery bhi change ki h laiken phir bhi yehe problem hai...plzzzz solve my this problem
↧
DELL VOSTRO 15 3546 battery
I recently bought a a new laptop ESC:<ADMIN NOTE: Express service code removed per privacy policy> with ubuntu installed in it. I am facing the following problem:my battery shows 70% charge or something and then suddenly it shuts down, and ehwhen i turn it on again after plugging in , It shows 0% or slightly more.Why does this sudden jump happen? How to avoid this?Should I charge my battery for 12 hours or something?
↧
Inspiron 17 (7737, mid 2013) Bios Flash (upgrade) Failure
Hello all,
except for BIOS (Version A4), my system is up to date with latest drivers and Windows Updates installed.
The support page, using Dell System Detect, recommends the latest version (A13). Reading that a few posters succeeded in migrating to Windows 10 after updating their BIOS to this version, I proceeded to do the same.
So I saved 7737a13.exe to my laptop and followed the installation instructions to a T.
1st method: running the utility from a Windows environment. Here's a description of what happened:
1. windows extractor opens cmd.exe which shows the following:
Intel ME firmware version is the same with image, skip ...
Perform BIOS upgrading ...
2. Phoenix SCT Flash for Windows opens and shows the following:
Initialize Flash Module.
Read current BIOS.
but then, program stops and WinFlash64.exe has stopped working pops up.
2nd Method: I ran the exec from DOS environment. There was no need to add (space) + /forceit after exe. DOS succeeded in extracting the utility and this time, the following message appeared (from memory so wording might not be exact):
This driver version is too old. Please try installing a more recent version.
After rebooting to Windows, System still shows Version A4 installed.
The weird thing is that version A13 was last updated on the 31st of July and it's definitely more recent than the Factory Reset version A4 my system is currently running. Is there anyway to force install this version or make Windows recognize that A13 is indeed more recent?
I'm in a bit of a bind because I'd really like to upgrade to Windows 10 but from what I've read, a great number of users were only able to successfully do so after upgrading their BIOS to A13.
Any help or suggestion would be very much appreciated [ip]
↧
Dell Latitude E5440 Fingerprint issue with Windows 10
I can't use the fingerprint with Dell Data Protection | Security Tools after I upgrade to Windows 10. With Windows 8.1 driver but Windows Hello works fine. But Windows 10 always tried to upgrade the driver which the new version makes my fingerprint won't work anywhere.
Please fix this issue ASAP
↧
↧
Brightness 100% but very dim some times
some times my laptop automatically very less brightness even brightness showing full or 100% with power on or on battery
at the time i have remove power cord and inserting again and again some time it contacting and giving brightness
↧
Windows 10 Pro is causing driver and startup problems in Dell 7720
Hello Everyone.
This is one long query. And I believe other people are facing similar problem too. I hope I get my answers.
I just upgraded from Windows 8.1 Professional to Windows 10 Professional. I have installed each and every update from Windows Update as well as Dell Updates.
And I've been facing some issues from day one.
Whenever I restart my windows, The Windows Explorer crashes and restarts when I try to open the Notifications, Wi-fi Networking, Battery or Start Menu. (I'm not taking about Internet Explorer. I'm talking about the Windows Explorer the one with Start Menu and taskbar and the whole GUI) It crashes, everything closes, and then the explorer rebuilds itself and things get back to normal. But again, it happens. So I keep opening the start menu and let it crash and restart about 4-5 times until it gets stable. Then it works fine afterwards.
At first i thought it was because I was running RapidStart and RapidStorage technology (using my 32GB SSD as caching drive). So I disabled the cache, set the SSD to offline and uninstalled both RapidStart and RapidStorage. They were not helping out anyway because even with caching enabled, the Windows 10 startup was far slower than Windows 8.1 without SSD caching.
But disabling the SSD didn't help at all. Explorer still crashed. Nothing Changed. So I enabled the SSD again, reinstalled those programs back and nothing changed.
The applications of SSD programs (Intel Rapid Start and Intel Rapid Storage) showed that everything is fine, everything is enabled and the booting Hard Disk is being accelerated. Its just that there is no practical benefit.
Another issue is when copying files from one Hard Disk to another Hard Disk (not different drives within same HDD, I'm talking about two separate physical Hard Disk Drives - one accelerated by SSD and one not). The copying speed in Windows 8.1 was around 200-300 MB/sec for small files up to 1GB and 80-90 MB/sec for larger ones.
But in Windows 10, they're reduced to 60-70 MB/sec initially, and then the speed drops down to mere 18-19 MB/sec. It's as if the HDD is constantly under too much load even with the SSD caching enabled.
Only thing that SSD caching does in Windows 10 is speed up opening of application after I've opened them once. For example, once I open the Photoshop and close it, it will open much faster next time.
But Windows Booting, Windows Startup, Logging in... they all take so much time as if i'm using a decade old 4500rpm Hard Disk. In Windows 8.1 it was much faster (just below a minute without the SSD, and with the SSD enabled, windows started up within seconds).
So I tried uninstalling the SSD Drivers (RapidStart and RapidStorage). RapidStart was uninstalled fine, but I couldn't uninstall Rapid Storage. It gave me the error: There is a pending reboot for this product.
I tried rebooting and uninstalling but it didn't work. I tried disabling SSD and reset to available, even cleaned the SSD using Diskpart, but still couldn't uninstall it. So I used RevoUninstaller. It removed all the files and registry items manually.
Then, I download the latest drivers from Intel Download Center for Windows 10 (not from Dell, they don't have new SATA drivers for Windows 10 yet), but i cannot install them now. I open the setup file and it gives same error: There is a pending reboot for this product.
Please help me out. My laptop has gotten too slow after Windows 10 upgrade.
Specifications for my laptop:
Intel 3rd Gen i7 CPU | 8GB DDR3 RAM | nVidia 650M GT (3D stereoscopic 120Hz display), 2GB GDD5 | 32GB mSATA caching SSD + 1TB HDD (accelerated) + 1TB HDD
↧
Dell Inspiron 15R N5110 - Hangs on Sleep
Hi All,
My computer is hanging when it tries to enter sleep mode. The screen will turn off but the computer continues to run indefinitely. I have tried debugging it myself but it has exceeded my abilities.
The only way i can get out of this freeze mode - is by forcing power off (pressing without releasing the power button)
I have tried updating all the drivers to latest version + chipset + Bios.
I have tried rolling back all drivers and disabling different hardware to try and analyze the root cause but could not solve this issue.
I was suggested (and also believe) that Formating my OS will solve this issue - which will probably do so, but in my case it is not an option.
It happened on Windows 7 and still persists on Win10
Here is my powercfg -a (and attached is the powercfg /energy - report)
C:\>powercfg -a
The following sleep states are available on this system:
Standby (S1 S3)
Hibernate
Hybrid Sleep
Fast Startup
The following sleep states are not available on this system:
Standby (S2)
The system firmware does not support this standby state.
Standby (S0 Low Power Idle)
The system firmware does not support this standby state.
C:\>
↧
More Pages to Explore .....
